Capability 01 / 04
Parts that match the drawing, proven with a report.
Housings, shafts and bushings leave this floor with a CMM report in the box. Twelve vertical machining centers, six lathes and two five axis cells run the same inspection sheet, whether the order is one part or ten thousand.
What we make
- Housings and covers
- Shafts and spindles
- Brackets and mounts
- Manifolds and valve bodies
- Bushings and sleeves
- Heat sinks and plates
- Adapters and couplings
- Gears and pinions
Three, four and five axis milling plus turning to Ø400 mm, for prototypes and production runs up to 100,000 parts a year.
Request a quoteSpecification
The numbers we hold.
Tolerances are quoted against the drawing, not against a general promise. If a feature needs a different process to repeat, the quote says so before you order.
| Materials | Aluminum 6061 T6 and 7075 T6, stainless 303, 304, 316L and 17 4 PH, brass C360, titanium grade 5, POM, PEEK, polycarbonate |
|---|---|
| Tolerances | ±0.005 mm on turned features, ±0.01 mm on milled features, ±0.02 mm on hole positions |
| Surface finish | Ra 0.4 µm as machined, Ra 0.2 µm after lapping on request |
| Envelope | Ø400 × 600 mm turning, 1200 × 600 × 500 mm milling |
| Volume | 1 to 100,000 parts per year |
| Lead time | 10 to 14 days for prototypes, 18 to 25 days for production after first article approval |
| Inspection | CMM report per lot, first article on the first part, material certificates matched to heat numbers |
| Finishing | Anodize, hard anodize, bead blast, passivation, nickel plate, powder coat, laser marking |
Next step
Send the first drawing.
You get a design review, a fixed price and a ship date within 48 hours. If the part is a bad fit for our floor, we say so and point you somewhere better.
sales@vorlixtools.com · Mon to Sat, 08:30 to 18:00 (GMT+8)